Version 1.0


EOL PRODUCT: This product has been discontinued, due to market demand and shifts in technology. Please Contact us if you would like to purchase it.

Product Overview

PIM-125-C (PN: CS-D125) is a 12.5” industrial display that features a 10-point capacitive touch screen with a resolution of 1920 x 1080 (16:9) pixels and brightness of 220 cd/m2. The 3mm tempered glass cover with black silk-screen ensures the screen is water and steam resistant.

The typical power consumption is ≤ 15W, while in standby mode, PIM-125-C uses around ≤ 2W, making it ideal for all kinds of applications.

Ordering Options

Most of the Chipsee products can be customized during the ordering process. The product will be shipped with the pre-installed factory defaults if no extra requirements are specified. The table in the Specification section provides information about the product.


You can order PIM-125-C from the official Chipsee Store or from your nearest distributor.


Table 224 Key Features





220 cd/m2

Contrast Ratio


Viewing Angle

Horizontal: 170° / Vertical: 170°

Response Time

35ms (GTG)

Display Color

16.2M Colors

Display Resolution

1920 x 1080 (16:9)

Refresh Frequency


Input Resolution

1920 x 1080 (16:9) @ 60Hz



Built-in Speaker


OSD Features

OSD Control


OSD Language

English, Chinese

Touch Features


3mm Tempered Glass with Black Silk-screen

Touch Point


Touch Technology

Projecting Capacitance (G+G)

Type of Pen

Fingers, Hands with Gloves, Conductive Stylus


Touch surfaces will not be affected by water droplets or steam


No Calibration Tool

Response Time

7ms to 12ms


1 x USB 2.0 (Type-B)

Multi Touch Protocol Support


Operating System

Windows 7/8, Android, Linux

Mechanical Features


305 x 185.4 x 29.5mm

Packaging Size

362 x 230 x 70mm



Mounting Methods

VESA, MIS-D, 100, C

Electrical Features

Power Input

9V - 30V

Power Supply

≤ 15W

Standby Power

≤ 2W

Environmental Features

Work Environment (temp.)

From 0°C to +40°C, 90% RH

Storage Environment (temp.)

From -20°C to +60°C, 90% RH

Other Features


Bracket /Power Line /VGA Line/USB Line/Power Adapter

Mounting Procedure

The PIM-125-C Industrial PC supports VESA 100 x 100 mounting pattern with 4 x M4 screws, enabling simplified installation onto any standard VESA mounting rack. Other mounting options might also be supported according to the table in the Specification section.

You can find detailed information about mounting in the Mount IPC Guide.

Mechanical Specifications

The outer mechanical dimensions of The PIM-125-C Industrial PC are 305 x 185.4 x 29.5mm (W x L x H). Please refer to the technical drawing in the figure below for details related to the specific product measurements.


Figure 995: Technical Drawing

Technical Support

Please feel free to contact us with any questions, queries or suggestions.

If your question is related to technical support or troubleshooting for one of our products, we kindly ask you to check our documentation for a possible solution first.

If you still cannot find the solution you are looking for, please write to Chipsee Technical Support at service@chipsee.com, providing all relevant information.



Chipsee assumes no responsibility for any errors that may occur in this manual. Furthermore, Chipsee reserves the right to alter hardware, software, and/or specifications set forth herein at any time without prior notice, and undertakes no obligation to update the information contained in this document. Chipsee products are not authorized for use as critical components in life support devices or systems.